LVR CPR Course Gosford - Low Voltage Rescue & CPR Training
Looking for an LVR CPR course in Gosford? FindTraining connects electricians, apprentices and employers with a network of quality local trainers delivering nationally recognised Low Voltage Rescue (LVR) and CPR training. Find available courses, dates and training locations in Gosford and across the Central Coast.
An LVR CPR course combines two nationally recognised units: UETDRMP018 Perform rescue from a live low voltage panel and HLTAID009 Provide cardiopulmonary resuscitation. Training covers electrical hazards, safe rescue procedures, CPR, automated external defibrillator (AED) use and emergency response.
The course suits licensed electricians, apprentices, electrical contractors, safety observers and Electricity Supply Industry (ESI) workers. It builds the practical skills needed to respond to electrical emergencies without putting rescuers at further risk. Employers may require workers to keep their LVR and CPR training current.
FindTraining makes it easier to access training through approved local providers. Courses delivered under Allens Training Pty Ltd, RTO 90909, follow the RTO's training and assessment standards. Check the available dates, venue and delivery format to find a course that suits your schedule.
Featured Venues
2 BURNS ROAD
OURIMBAH, NEW SOUTH WALES, 2258
2 BURNS ROAD
OURIMBAH, NEW SOUTH WALES, 2258
10 LANGFORD DRIVE
KARIONG, NEW SOUTH WALES, 2250
10 LANGFORD DRIVE
KARIONG, NEW SOUTH WALES, 2250
389 AVOCA DRIVE
GREEN POINT, NEW SOUTH WALES, 2251
Featured Providers
Search for Specific Delivery Mode
What Is LVR CPR Training?
LVR CPR training prepares electrical workers to respond to incidents involving low-voltage equipment. It combines electrical rescue skills with cardiopulmonary resuscitation.
Low voltage rescue training teaches workers to identify hazards, follow safe isolation procedures and use rescue equipment. Students practise rescuing a casualty without putting themselves or others in danger.
CPR training covers casualty checks, emergency calls, chest compressions, rescue breaths and AED use.
What Does Low Voltage Rescue Involve?
Low Voltage Rescue, or LV rescue, means removing a casualty from electrical danger using safe procedures and suitable equipment.
In Australia, low voltage means electricity above extra-low voltage and up to 1,000 volts AC or 1,500 volts DC.
UETDRMP018 focuses on rescue from a live LV panel. It covers hazard checks, rescue planning, equipment inspection and simulated rescue.
Students practise how to:
- Identify and manage electrical hazards.
- Check risks to themselves and others.
- Locate electrical isolation points.
- Select and inspect rescue equipment.
- Follow safe rescue procedures.
- Remove a casualty from a live LV panel.
- Assess the casualty when it is safe.
- Secure the area and report the incident.
The goal is to rescue the casualty while preventing further injury.
Why Is CPR Included in LVR Training?
Electric shock can cause cardiac arrest. A casualty may be unresponsive and not breathing normally.
CPR training helps workers recognise this emergency and provide care when the area is safe.
LVR and CPR are taught together because workers may need both skills during an electrical incident.
The first priority is to protect the rescuer and make the rescue safe. CPR and other emergency care can then begin when it is safe to approach the casualty.
What Is DRSABCD?
DRSABCD is an emergency response process used in Australian first aid training.
- Danger: Check for hazards before approaching.
- Response: Check whether the casualty responds.
- Send for help: Call Triple Zero (000).
- Airway: Check and open the airway.
- Breathing: Check for normal breathing.
- CPR: Start CPR if the casualty is unresponsive and not breathing normally.
- Defibrillation: Use an AED as soon as one is available.
During an electrical emergency, never touch a casualty who is still exposed to electrical danger.
Nationally Recognised LVR and CPR Units of Competency
An LVR CPR course includes two nationally recognised units. Each unit develops skills that support electrical safety and emergency response in the workplace.
UETDRMP018 Perform Rescue from a Live Low Voltage Panel
UETDRMP018 covers how to prepare for and perform rescue from a live low voltage panel.
Training includes electrical hazards, rescue equipment, safety observer duties, emergency response and incident reporting.
Students must perform rescue procedures during a simulated assessment.
UETDRMP018 replaced UETDRMP007 in August 2025. Some older records may also show UETDRRF004.
Check which unit your employer needs before booking.
HLTAID009 Provide Cardiopulmonary Resuscitation
HLTAID009 teaches students to provide CPR in line with Australian Resuscitation Council guidelines.
Training covers casualty checks, emergency calls, chest compressions, rescue breaths and AED use.
Assessment includes at least two minutes of uninterrupted single-rescuer CPR on an adult manikin placed on the floor. Students must also demonstrate infant CPR skills.
Who Needs LVR CPR Training in Gosford?
LVR CPR training suits workers who work on or near low-voltage electrical systems. It is also relevant to staff who may need to respond to electrical emergencies.
Common participants include:
- Licensed electricians: Workers who install, maintain or repair electrical systems.
- Electrical apprentices: Students building electrical safety and rescue skills.
- Electrical contractors: Workers on residential, commercial and construction sites.
- Maintenance technicians: Staff who maintain electrical equipment.
- Electricity Supply Industry workers: Workers involved in electrical infrastructure.
- Electrical safety observers: Staff who monitor electrical work for hazards.
- Emergency response personnel: Workers who may assist during electrical incidents.
Workers in Gosford and across the Central Coast may need LVR CPR training to meet employer or site rules.
Through FindTraining's network of local training partners, electrical workers can access nationally recognised training without needing to travel to a single central training location.
Course availability depends on the training schedule and venues serving the area.
Is LVR CPR Training Mandatory in NSW?
The need for LVR CPR training depends on the work being done, the risks involved and the rules that apply.
Many employers require current LVR and CPR skills for certain electrical tasks.
However, there is no universal rule that every NSW electrician must renew the same LVR CPR course each year.
Before enrolling, ask your employer which units you need and how recent your training must be.
LVR CPR Course Prerequisites and Entry Requirements
Check the course entry requirements before booking.
These may include prerequisite training, basic electrical knowledge and physical assessment tasks.
Is HLTAID009 a Prerequisite for LVR Training?
Yes, HLTAID009 Provide cardiopulmonary resuscitation is a formal prerequisite for UETDRMP018.
A combined LVR CPR course includes both units. The training provider will explain how the prerequisite is met during the course.
Already hold the required CPR unit? You may prefer a standalone UETDRMP018 Low Voltage Rescue course.
Do I Need an Electrical Licence or Experience?
LVR training is aimed at people with relevant electrical knowledge.
An electrical licence is not a universal formal prerequisite for UETDRMP018. However, training providers may apply entry conditions based on the course and student requirements.
Students should understand basic electrical hazards and be able to follow safety instructions.
If you are unsure about your prior experience, contact the provider before booking.
What Are the Physical and Learning Requirements?
Students must be able to complete simulated rescue tasks and perform CPR on a manikin placed on the floor.
They also need suitable language, literacy, numeracy and digital skills to complete course activities.
Depending on the course, students may need to:
- Provide acceptable identification.
- Complete online learning before attending.
- Read and follow safety instructions.
- Take part in a simulated electrical rescue.
- Perform CPR and use an AED.
- Complete written and practical assessments.
- Wear suitable clothing and enclosed footwear.
Contact the provider before enrolling if you have concerns about the physical requirements or need student support.
LVR CPR Course Cost and Training Locations in Gosford
FindTraining connects students with local training partners offering LVR CPR courses across Australia, including providers serving Gosford and the Central Coast.
Our network gives electrical workers access to local training opportunities while maintaining the requirements set by the Registered Training Organisation.
Course fees and schedules are shown through the relevant booking arrangements. Check the available session for its current price, date and venue.
What Is Included in LVR CPR Training?
A combined LVR CPR course covers:
- UETDRMP018 Perform rescue from a live low voltage panel.
- HLTAID009 Provide cardiopulmonary resuscitation.
- Electrical hazard awareness and rescue procedures.
- Practical rescue training and assessment.
- CPR and AED skills.
- A nationally recognised Statement of Attainment after successful completion.
Depending on the delivery format, the course may also include online learning before the practical session.
Check the booking information for the full course requirements.
Where Can I Complete LVR CPR Training Near Gosford?
FindTraining provides access to a network of quality training partners serving communities across Australia.
For students in Gosford, this means finding available LVR CPR training in Gosford or nearby Central Coast locations.
Rather than relying on one training centre, FindTraining connects students with local providers operating within the wider training network.
Training locations depend on scheduled sessions. A course listed for the Gosford area may take place outside the CBD.
Check the exact venue address, session date and parking or transport details before booking.
Can Businesses Arrange Onsite LVR CPR Training?
Some approved training partners may offer onsite training for businesses.
This depends on suitable training space, rescue equipment, assessment needs and trainer availability.
Employers should provide the number of students, preferred dates, training location and units required.
Group bookings can help businesses organise training for staff at a suitable time and location.
How Often Do You Need to Renew LVR and CPR Training?
A 12-month refresher cycle is commonly recommended for LVR and CPR training.
However, a nationally recognised Statement of Attainment does not automatically expire after one year.
There is a difference between completing a unit and meeting your employer's current training rules.
LVR Refresher Training
Many electrical employers require workers to refresh their LVR skills every 12 months.
Refresher courses cover electrical hazards, rescue equipment, LV panel rescue procedures and emergency response.
Check with your employer to confirm how often you need to renew your training.
CPR Refresher Training
The Australian Resuscitation Council recommends refreshing CPR skills every 12 months.
Regular training helps workers practise chest compressions, rescue breaths and AED use.
Does My LVR CPR Certificate Expire?
A Statement of Attainment records the units you have completed.
It does not automatically expire after 12 months.
However, employers may ask for proof of more recent training. This helps them confirm that workers have current rescue and CPR skills.
Check your workplace rules before booking a refresher.
What Practical Skills Are Covered in LVR CPR Training?
LVR CPR training combines theory with hands-on practice.
Approved training partners delivering under Allens Training Pty Ltd, RTO 90909, follow the RTO's training and assessment requirements. students must demonstrate the skills needed for the nationally recognised units.
Electrical Hazard Assessment and Safe Isolation
Before a rescue, workers must assess the electrical hazards and risks.
Training covers how to:
- Identify electrical hazards.
- Check the rescue situation.
- Locate isolation points.
- Choose suitable rescue equipment.
- Follow workplace safety procedures.
- Plan a safe emergency response.
Workers must avoid becoming another casualty. Rescue procedures must follow the safety controls that apply to the workplace.
Performing an LV Panel Rescue Procedure
During practical training, students practise rescue from a simulated live LV panel.
The exercise includes:
- Checking the area for hazards.
- Following the emergency procedure.
- Inspecting and preparing rescue equipment.
- Performing the required rescue technique.
- Assessing the casualty when it is safe.
- Securing the area and reporting the incident.
These activities help students apply rescue skills to situations they may face at work.
Using Low Voltage Rescue Equipment
An LVR kit may contain an insulated rescue crook, insulating gloves, a fire-resistant blanket and a CPR face shield.
The exact contents depend on the workplace and its rescue needs.
Students practise checking equipment and using it during simulated rescue tasks.
Electrical Safety Observer Duties
An electrical safety observer watches for hazards and unsafe conditions.
The observer may need to warn workers, raise the alarm and begin emergency procedures.
Their exact duties depend on the job, site rules and electrical safety requirements.
CPR and AED Practical Assessment
The CPR course teaches students to:
- Check a casualty's response and breathing.
- Call emergency services.
- Provide chest compressions and rescue breaths.
- Perform two minutes of uninterrupted CPR on a manikin.
- Use an AED.
- Place a breathing casualty in the recovery position when appropriate.
- Report the incident.
Students must complete the required assessment tasks to pass the unit.
How Long Does an LVR CPR Course Take?
Course duration depends on the delivery option and the student's experience.
Our combined LVR CPR course set has these minimum face-to-face contact times:
- Refresher training: 3 hours and 30 minutes.
- Face-to-face training: 5 hours.
- Online learning with face-to-face assessment: 1 hour of face-to-face contact, plus online study.
These are minimum contact times. They may not include all online learning, preparation and assessments.
Approved local training partners deliver courses under the relevant training and assessment arrangements. Check the available session for its full timetable.
Can I Complete LVR CPR Training Online?
You cannot complete LVR CPR training entirely online.
Some courses let students complete theory online before attending practical training.
All students must demonstrate the required rescue and CPR skills in person.
Should I Choose LVR CPR or LVR First Aid?
Choose a course that includes the units your employer needs.
A combined LVR CPR course includes UETDRMP018 and HLTAID009.
A broader LVR First Aid course may also include HLTAID011 Provide First Aid.
HLTAID011 covers more first aid skills than CPR alone. It is not included in every LVR CPR course.
Check the unit codes before enrolling.
Book LVR CPR Training in Gosford
FindTraining makes it easy to access nationally recognised LVR CPR training through a broad network of approved local training partners.
Whether you're an electrician renewing your skills, an apprentice completing required training or an employer organising courses for staff, FindTraining helps you find a suitable training session near you.
Allens Training partners work under the same RTO training and assessment framework, giving students access to quality training through a network of local providers.
To find an LVR CPR course in Gosford:
- Find your course: Select the combined UETDRMP018 and HLTAID009 training.
- Choose a location: Find a scheduled session in Gosford or a nearby Central Coast area.
- Select a date: Choose a course that fits your work and personal commitments.
- Check the details: Review the venue, price, delivery format and entry requirements.
- Enrol: Complete your booking through the available course arrangements.
Businesses can also enquire about group bookings and onsite training where available.
Access nationally recognised training from quality local trainers, backed by the standards of an established Registered Training Organisation.
Frequently Asked Questions About LVR CPR Courses in Gosford
What Does LVR CPR Stand For?
LVR CPR stands for Low Voltage Rescue and Cardiopulmonary Resuscitation. The course teaches electrical rescue procedures, CPR and AED skills.
Is LVR CPR Nationally Recognised?
Yes. UETDRMP018 and HLTAID009 are nationally recognised units. students who pass all required assessments receive a Statement of Attainment through the relevant Registered Training Organisation.
Who Delivers LVR CPR Training Through FindTraining?
FindTraining connects students with approved local training partners. For the combined course listed under Allens Training Pty Ltd, RTO 90909, participating partners deliver training and assessment on behalf of the RTO and follow its training and assessment requirements.
Are Allens Training Partners Held to the Same Standards?
Yes, approved training partners delivering on behalf of Allens Training Pty Ltd, RTO 90909, operate under the RTO's training and assessment framework.
Students can select a suitable local training session based on location and availability, knowing that the same RTO requirements apply.
Do Electricians Need LVR CPR Training Every Year?
Many employers require annual refresher training. However, this is not a universal rule for all NSW electricians. Check your employer's requirements.
Can Electrical Apprentices Enrol?
Electrical apprentices may enrol if they meet the provider's entry requirements. Check that the course suits your work and training needs.
Does LVR Training Cover Overhead Lines and Underground Cables?
No, UETDRMP018 focuses on rescue from live low-voltage panels. It does not cover rescue from overhead lines or underground cables.
What Is the Difference Between LVR and LVR CPR?
A standalone LVR course covers UETDRMP018, which has HLTAID009 as a prerequisite. A combined LVR CPR course includes both units.
Can I Book a Refresher Instead of the Full Course?
Refresher training may be available if you meet the provider's conditions. Check that the option meets your employer's needs.
Can Businesses Book Group LVR CPR Training in Gosford?
Some approved training partners may offer group or onsite training. This depends on facilities, equipment and available dates. Contact the provider to discuss your requirements.